Suppliers of Non-Destructive Test Equipment
ADVANCED NDT LTD
ADVANCED NDT LIMITED,
Orchard House, Orchard Close, Severn Stoke, Worcester, UK    WR8 9JJ
Telephone: 44 (0) 1905 371460         ***  Fax:   44 (0) 1905 371477
E-Mail:  sales@advanced-ndt.co.uk ***  Website:   www.advanced-ndt.co.uk
Suppliers of Non-Destructive Test Equipment
                               Duo UV Lights

The Duo range of Labino Ultraviolet UV Lights used for many applications including NDT inspections, Leak Testing, Crime Scene Investigation and many more

 

PS135

Labino Duo UV Lamps have unbeatable UV intensity, creating extreme excitation of fluorescent material, which makes it possible to see things, in daylight and at great distances, that was once impossible with former technology.

The Labino Duo Lamp is available in three important distinctions - floodlight, midlight or spotlight - each giving different beams and intensities.

The Labino Duo obtains full power in 5-15 seconds and can even be switched on and off when used, without pre-cooling.

The lamp is shock proof, generates very little heat, and is unaffected by magnetic fields.

You can use the lamp outdoors, even in the rain, as the lamp is IP65 Certified.

Labino Duo lamps are based on two key components - the Labino DUV-35W Gas Discharge Bulb(MPXL Technology) and the Labino Trigger Ballast (Electronics). The interface technology between these key components creates unbeatable output performance.

Floodlight

Distribution angle (beam) 45°

Irradiance 3 000 μW/cm2 =at 38 cm

Midlight

Distribution angle (beam) 20°

Irradiance > 8 000 μW/cm2 =at 38 cm

Spotlight

Distribution angle (beam) 3.5°

Irradiance > 45 000 μW/cm2 =at 38 cm

Handles

Mounting Brackets

Pistol Handle

Voltage

100 VAC, 115 VAC, 230 VAC

12/24 VDC, operated from external 12/24 via included cigarette cable or from mains via PSU (PSU not included)

Input Power: 43 W

Output Power: 35 W

Technical Specification

Additional Information

Mechanical Stability (bulb): IEC810

Service life (bulb): approx. 2 000 hrs

Wavelength: UV-A, peak at 365 nm

Start-up time: full power after 5-15 sec

Material in housing: anodized aluminium, plastics PA6-30

The housing is via pre milled slots prepared for mounting devices

S, CE, ETL/cETL approved

IP65 classified, dust and temporary water jetting proof

The DUO UV Lights are a two-part lamp comprised of a luminary unit and a ballast unit (electronics). The luminary unit is short in length and light in weight.They can be supplied as S135 or as PS135.
S135 = Separate electronics (without any handle but with a pair of mounting brackets).
PS135 = Pistol Handle, Separate electronics
Models available: 135, H135 and PH135
Weight: Luminary unit: 1.2kg; Ballast unit: 1.5 kg
Cable length: Mains Cable: 2.0 m; luminary to ballast: 3.0 m.
All Labino UV Lights are available in a variety of reflectors:
Floodlight, Midlight or Spotlight

PS135 - Duo UV Light
S135 - Duo UV Light

S135

The Labino Duo is a two-part lamp consisting of a light weight luminary unit and a ballast (electronics) unit.

Weight
Luminary Unit: 1.2 kilos
Ballast Unit: 1.5 kilos

Cables
Mains Cable: 2.0 meters
Luminary–Ballast: 3.0 meters