The Labino Ultraviolet UV Lights give exceptional UV light output without generating a great deal of heat. This allows the cases to be totally sealed to IP65 so they may be safely splashed with water, etc.

As no cooling fans are needed, the lights are lighter, quieter and need less maintainance.

The lights are available in a variety of case styles.

Battery or Mains Operation (115v / 230v) and with a choice of Floodlight, Midlight or Spotlight Beam Profiles (see below).

Benefits of Labino UV-lamps

Unbeatable UV-irradiance/feed Watt, up to 70.000 microwatts/cm2 at 15” and full UV-A emission (315-400nm). This creates new possibilities, i.e. inspections in normally lit areas even outdoors in daylight with maintained contrast-to-background and maximized probability of detection. Quality/safety is improved, time of inspection is reduced.

35W output power - low heat generation and energy consumption. No need for cooling fans. Creates a pleasant work environment, reduces energy costs.

Immediate start/restart - full power in appr. 15 seconds. Competing lamps need up to 15 minutes to warm up. Saves time!

Unaffected by magnetic fields - Highly suitable for MPI. Competing lamps flutter and/or go out close to a magnetic field. Saves time!

IP 65 classified - Dust tight, withstands temporary water spray.
Can be used in rough conditions, even outdoors. UV-filter will not crack if exposed to fluids.

CE-marked - According to Electromagnetic Compatibility and the Low Voltage Directive. Safe products!

ETL/cETL approved - by Edison Testing Laboratories according to UL and CSA standards. Safe products!

Comprehensive product range, including portable, battery operated units. Suits most needs!

The Labino Ultraviolet Light lamps are based on two key components - Labino DUV-35W Gas Discharge Bulb (MPXL-technology) and Labino Trigger Ballasts (Electronics).

Labino ultraviolet light lamps are available with a choice of reflectors: Spotlight , Midlight , or Floodlight .

Labino UV Light Models

Labino UV Light - Compact
Available as Floodlight, Midlight or Spotlight
Type: 135
Mains Powered designed to be mounted on a bracket

Labino UV Light - Compact
Available as Floodlight, Midlight or Spotlight
Type: H135
Mains Powered with a top mounted handle

Labino UV Light - Compact
Available as Floodlight, Midlight or Spotlight
Type: PH135
Mains Powered with a Pistol Style Handle

Labino UV Light - Duo
Available as Floodlight, Midlight or Spotlight
Type: PS135
Mains Powered with a Pistol Handle, Seperate base unit and lamp

Labino UV Light - Duo
Available as Floodlight, Midlight or Spotlight
Type: S135
Mains Powered designed to be mounted on a bracket, Seperate base unit and lamp

Labino UV Light - Portable
Available as Floodlight, Midlight or Spotlight
Type: TrAc Pack Standard (TPS)
Battery Powered with a seperate base unit and lamp

Labino UV Light - Portable
Available as Floodlight, Midlight or Spotlight
Type: TrAc Pack Pro (TPP)
Battery & Mains Powered with a seperate base unit and lamp

Labino UV Light - Portable
Available as Floodlight, Midlight or Spotlight
Type: TrAc Light (TL)
Battery Powered with a compact style case and choice of top mounted or pistol style handle

Labino UV Light - Portable
Available as Floodlight, Midlight or Spotlight
Type: TrAc Light Pro (TLP)
Battery & Mains Powered with a seperate base unit and lamp

Click to download the brochure for the Labino Range

Labino UV Light Additions

The Cable Winder is manufactured specifically for customers with unique needs - ie, mounting on the ceiling or on the wall. This picture shows lamp model PS135, 12 VDC. The cables that normally extend between the lamp unit and the electronic ballast are enclosed in the Cable Winder. Current is fed via the Power Supply unit (PSU).
The PSU also serves as a protective transformer which means that the complete circuit (after the PSU) is floating. The Cable Winder includes a cable length of 7 meters fully extended. Rewind the cable back to the start position by a gentle tug on the cable. Total weight: 8.4 kg.

The New Cable Winder

The New Labino Friction Arm

A high quality, flexible and easy-to-use support system.
The system is suitable for many different applications, including Non Destructive Testing & UV-Curing, enabling the operator to work with two free hands.
Jointed arm with just one large locking knob.
Length: 53 cm (21”). Weight: 1.07 kg (2.35lb) arm only, 2.55 kg (5.61 lb) complete.

Labino UV LED Light - Portable or Mains
Available as Floodlight
Type:  BigBeam UV LED
Battery or Mains Powered
365nm, No UV-B, No White Light
Small Lightweight and Compact

The New Labino UV Blocking Face Shield