PortaScan 007 & PortaScan LT

Hidden corrosion and defects can cause serious problems and is responsible for millions of dollars annually in cost of replacement infrastructure and lost production, and is a dangerous threat to safety and the environment. With the PortaScan Series Data Acquisition & Imaging Systems you can easily detect and quantify most unseen potential hazards before they become problems.
Problem Solving Applications
In any environment, PortaScan 007 is the affordable solution for ultrasonic detection and monitoring of corrosion in pressure vessels, pipelines, cranes, bridges, storage tanks, railroad tank cars, ship hulls/decking, tube trailers, aging aircraft, composites, rocket motor cases, torpedo housings, rolls, plates, slabs, billets, bars, and much more.

The PortaScan 007 is used to detect corrosion on oil platforms in the North Sea, in pipelines and tank farms from Alaska to the Kingdom of Saudi Arabia, and airplanes from Seattle, Washington to Shanghai, Peoples Republic of China.
Need to test a number of places in hard to get at areas? Easy. The PortaScan 007 Ultrasonic Imaging System can collect data from scanners up to 150' (45 m) away using the optional 007CCB150 control cable bundle. Do your tests require both single and dual element transducers? Simple. Just recall the test set up from the built in Quantum ultrasonic instrument, slip the appropriate transducer and insert into the holder and begin testing. Store or retrieve images with header data, and immediately evaluate easy to read "C" scan, "B" scan, 3D and spreadsheet displays of actual recorded values. The 007 also exports the acquired data in an ASCII format for use in spreadsheets or other evaluation programs.

The PortaScan 007 is best suited for applications where high resolution and high definition are required, such as corrosion / erosion and where raw collected data needs to be imported into other systems.

Testing Can Take You Anywhere!

The PortaScan LT is used primarily for flaw detection and angle beam evaluation. Features include a notebook based PC, 40MHz PCMCIA digitizer card (an industry first), and a Windows based operating system. Acquisition features include the ability to capture A Scan, B Scan, C Scan P Scan TOFD and others. Several optional scanners are offered for use with the PortaScan LT. The PortaScan LT is best suited for applications where angle beam inspection is desired. The PortaScan LT can be optionally configured as an automated system.
Although the PortaScan LT can be used for corrosion work it is will not provide the level of detail and flexibility the PortaScan 007 will provide.

ISONIC 2006 uniquely combines functionality and mobility of high performance portable digital ultrasonic flaw detector with recording, imaging, and data processing capabilities of smart computerized inspection system
ISONIC 2006 resolves a variety of ultrasonic inspection tasks:

The ISONIC 2006 uses airborne sound to plot the path of a conventional ultrasonic probe. It monitors the coverage of the scan area by the operator and produces C-scan images, etc.

A coupling monitor may be used, when testing with angle beam probes, to verify the test results.

ISonic 2006

High Performance... Ultrasonic Flaw Detector and Full Imaging in one!

The Raptor is an All New Category in Ultrasonic Flaw Detectors. The Raptor is not only a fully contemporary high speed flaw detector BUT , also INCLUDES a Full featured C-Scan imaging system within the same package