|
Suppliers of Non-Destructive Test Equipment
ADVANCED NDT LTD
ADVANCED NDT LIMITED,
Orchard House, Orchard Close, Severn Stoke, Worcester, UK WR8 9JJ Telephone: 44 (0) 1905 371460 *** Fax: 44 (0) 1905 371477 E-Mail: sales@advanced-ndt.co.uk *** Website: www.advanced-ndt.co.uk
Suppliers of Non-Destructive Test Equipment
Raptor Imaging Flaw Detector
High Performance... Ultrasonic Flaw Detector and Full Imaging in One!
Full 5.7" 640x480 - VGA (FULLY SUNLIGHT VIEWABLE)
FULL 60HZ Display Update 10HZ up to 5KHz Rep Rate!! 50-450V @ up to 10,000ns Square and Spike Pulser RF, +HW, -HW & FW Live A, B & C Scan Dual Gates 20 Point DAC Up to 32GB SD Card Support Timed and Encoded B Scan SplitScan, SplitView AutoScan, AutoTrack Weld Trig Peak Echo Hold Screen Freeze & Store Full Featured Ultrasonic Flaw Detector AND Full Imaging System for the price of a STANDARD Flaw Detector! IMAGING FOR THE MASSES - At a PRICE anyone can afford !!
The Raptor is an All New category in ultrasonic flaw detectors. The Raptor is not only a fully contemporary high speed flaw detector BUT, also includes a Full Featured C-Scan Imaging system within the same package. USing three 32 bit microprocessors, the raptor offers substantially more in capability than ANY conventional flaw detector from ANY Competitor. Press the Flaw mode key and the Raptor perfoms as any High performance detector would. Press the imaging key and the Raptor becomes a full featured Flaw Detector AND Imaging System matching and in some cases exceeding the features of imaging systems costing more than $40,000, at standard flaw detector prices!!
The Raptor supports manual scanners, our all new inexpensive, light weight Li-ion battery powered semi-automated scanners as well as the capability to support fully automated stepper or servo operated high speed, high resolution scanners via NDT Systems new external "DriveBox" interface. Why buy any "standard" flaw detector when you can rely on a company offering 35 years of ultrasonic innovation. The Raptor simply out-classes any flaw detector available today! Raptor Screenshots
Raptor in Full Flaw ONLY Mode running in SplitView & AutoTrack
Raptor - Corrosion Scan
Raptor - C-Scan
Raptor - A-Scan & C-Scan SplitView
Raptor - C-Scan
Raptor - 3D View
Raptor - C-Scan Zoomed View
Raptor - Zoom to Spreadsheet Mode Of Corrosion Scan
Raptor Scanners Scanners: Manual, Semi-Automated and Fully Automated scanners supported. See examples below.
MMS2 - Mini Manual Hand Scanner features high resolution index capability. Can be ordered in a variety of sizes and interfaces DIRECTLY to the Raptor Imaging Flaw Detector.
Raptor Specifications
Display: Full 480 x 640 (VGA) Graphic (3.4"w x 4.55"H)
SplitView: (Handheld Industry First)
SplitScan: (Handheld Industry First)
AutoTrack: (Handheld Industry First) A,B and C-Scan imaging standard Screen Freeze Mode or Instant-Freeze Mode... Perfect for Spot Weld Applications
Physical: 5.75" Wide x 3" Deep x 9.5"long - 5.6lbs with Battery
Range: 0.05" - 400" Velocity Range: 0.0490 to .9999 in/us - Fully Adjustable Calibration: Range, Delay, Velocity & Zero Pulser / Receiver: Up to 10KHz Rep Rate, Spike and Square Wave Pulser (50v to 400v and 5 to 10,000ns) Display Mode: RF, +HW, - HW, FW - Hollow and Filled Gain: 100dB, Damping - 8 Levels Frequency Range: 500Khz to 20MHz Tuning: 0.5, 1.0, 2.5, 5 & 10MHz Probe Select: Single / Dual Element Probe ID Key (NDT Gauging Probes) or Probe Library Selection Peak Echo Hold: Fixed or Unique Timed "Waterfall" reset Alarm: LED Thickness High, Lo or High/Lo, Amp +/- Level I/O: USB 2.0 Connectivity SD Card: Up to 32GB user removable Flash Card Memory: 75MB On Board Memory (System & Storage) Operational Modes: Single / Dual / Angle / Contact / Delay
Gates: 20 Point DAC
Imaging Feaures: Scanners: Manual, Semi-Automated and Fully Automated scanners supported. Power Requirements: Operates on One Li-ion Battery for up to 8 hours while imaging! Charger Included Transducers, Cables and accessories are available for almost any application Plastic Carry Case Included CE Approved Manufactured in facilities meeting ISO9001 manufacturing processes |